2001 Toyota Tundra Metal Shavings In Transmission Pan

Remove the front drivers wheel.

2001 toyota tundra metal shavings in transmission pan. So far im thinking this is the process I warm up the fluid by switching to all gears while parked. High metal shavings content etc. DIY you could do a pan drop and look at the filtermagnets that allude to the condition of your trans.

All these features combined help dissipate heat quicker netting lower transmission and fluid temperatures prolonging the. The transmission occasionally made a clunking noise and felt like the tire hit a small pothole in the road when shifting into overdrive. Glue some magnets to the bottom of.

Then get the fluid to the correct temperature 115-135 Remove drain plug. A great idea after overhauling the transmission to catch any remaining metal particles in the system but should be removed from the cooling line as it will restrict cooling flow if it plugs up. 5Pcs 12V Waterproof Push-Button On-Off Switch Carbhub 12V Waterproof Push-Button On-Off Switch with 4 Leads For MotorcycleAuto Car.

The vehicle has about 175K miles and has had the trans fluid flushed out once in the past and drain. It catches what the magnets dont before it can get back to the oil pan. The pan magnets had mostly small metal shavings but also a few larger pieces around 14 long.

Here is a photo of the shavings that were on it. This started around 80000 miles. Toyota Tundra 2000 transmission.

These services are necessary to prolonging the life of. I dont have a Tacoma but I do have a 02 Tundra with 173000 miles. This is an egregious mechanical failure on a vehicle with low mileage and well maintained.