2001 Toyota Tundra Rear Bumper Removal

I am assuming you have the 5VZ-FE engine which can pull 4900 lbs SR5 or 4750 lbs Limited.

2001 toyota tundra rear bumper removal. The tongue capacity of 500 lbs is the weight of the hitchball can take from gravity so you can drop 500 lbs onto the. This will soft the bumper so you push it out easily on the car. Remove tail lamp four 8mm nut perside unplug wires.

All the same-as-original bumpers from K-Metal are a perfect option to go if you want to restore and maintain the original look of. Remove the bumper arm-to-body bolts from each side of the bumper. The center portion has the same plastic tabs and two plastic hooks youll have to bend in a little behind the license plate.

New 2020 2021 complied Toyota Tundra Platinum powered by a 381hp 57ltr V8 coupled with the 6 speed automatic. -remove the cover of the bumper underneath and Unscrew two screws on each side twisted upside down-around the bottom part Unscrew the screws spun up-assistant exempt corners of the latches in the wings and remove the bumper from the guides themselves-remove the connector from the fog lamp if any-remove connector from the PDC if any. Toyota Solara -Under the hood unscrew the screws and pull out the pistons screwed and inserted from top to bottom that secure the upper part of the bumper and the radiator grill.

This can wait if you choose. Remove the metal cross bar above the upper portion of the bumper. Remove black clips under tail lamps flat head screwdriver to pull center of the clip up slowly then remove the hole clip.

After those bolts are removed you can pull the sides of the cover away from the quarter. There is a screw on each side of the bumper cover at the wheel wells. The hardest part of removing the bumper is getting under the truck and popping the small plastic tabs that hold the black top cover on.

It should be a 10mm. Do the two outer parts first. Seems pretty extensive scrub bumper with mild soap rinse with DI water dry degrease sand bumper clean again with soap and rinse with DI water degrease with anti-static plastic cleaner apply plastic parts adhesion promoter apply plastic parts primer.