2001 Toyota Tundra Serpentine Belt Replacement

The average cost for a Toyota Tundra drive belt tensioner replacement is between 306 and 348.

2001 toyota tundra serpentine belt replacement. REMOVE V-BANK COVER SUB-ASSEMBLY. What kind of vehicle do you drive. Labor costs are estimated between 161 and 203 while parts are priced at 144.

I was past due on replacing this belt so I thought Id make a quick video while I did it. The Toyota engine uses a serpentine belt to rotate many of the accessories of the engine such as the air conditioning compressor the alternator the power steering pump and the water pump. This range does not include taxes and fees and does not factor in your specific model year.

Easy first time do it yourself and save money. Then insert a bar of diameter5 mm 0197 in into the service hole to fix the belt. But dont actually remove the bolt just enough to move the assembly -- itll make sense in person.

Slowly turn the tensioner clockwise until it connects with the belt and holds it in place. Replacing the timing belt will likely cost somewhere around 400. Place strips of masking tape over the edges of the belt on each pulley to hold the belt in place while you route it through the system.

A While turning the belt tensioner counterclockwise align the service hole for the belt tensioner and the belt tensioner fixing position and. Shut it down and popped the hood to discover the serpentine belt had blown apart and was wrapped around the fan shaft. How to replace 2000-2006 2007 Toyota Tundra Serpentine Belt and Alternator Replacement tutorial.

2 Hold the tensioner loose and put the 5mm hex key into the service hole once its accessible to keep the tension off so you can work with the belt. Owners of 4-cylinder Highlanders from 2001 to 2007 and V6s from 2008 have chains however no belt is needed. Route the new belt through the pulley system by using the serpentine belt diagram chart as a reference.