2006 Toyota Tundra Double Cab Key Fob Programming
Perform these steps within 5 seconds.
2006 toyota tundra double cab key fob programming. Insert and remover the key from the ignition switch. Within 3 seconds the door locks should lock and then unlock once indicating successful programming. With the key OUT of the Ignition OPEN and UNLOCK the Drivers door.
An optional keyless entry system is available on the Tundra. If the door locks cycle twice repeat steps A. The drivers door open and unlocke.
Press the lock and unlock buttons on the remote simultaneously for 15 seconds. INSERT key into Ignition Do NOT turn and PULL the key out. INSERT key into Ignition Do NOT turn and PULL the key out.
I lost my spare set of keys for my Tundra 2008 DC 4x4 a little while ago yes stupid move and I was mad at myself. Insert the key into the ignition Do NOT Turn it and Pull key out. Perform these steps within 40 seconds.
Within 40 seconds lock and then unlock the doors five times using the power lock button on the drivers side door. Its bed is nearly 5 inches 130 mm longer than the competing Nissan Titan or Ford F-150. Start with the key out of the ignition drivers door is open all others closed and drivers door is unlocked.
Step-By-Step How To Programming Instructions. I purchased one on Ebay made sure I got the right version for the DC based on the manual and I cant get it to program. Immediately after letting go of the lock and unlock buttons Press the lock button by itself and hold for 2 seconds.